The ExtremeSwitching X435 series includes the following switches:
|
X435-8T-4S switch X435-8P-4S switch |
Height: 1.71 inches (4.34 cm) Width: 12.6 inches (32.0 cm) Length: 7.9 inches (20.06 cm) |
|
X435-8P-2T-W switch |
Height: 1.73 inches (4.39 cm) Width: 8.2 inches (20.82 cm) Length: 10.1 inches (25.65 cm) |
|
X435-24T-4S switch X435-24P-4S switch |
Height: 1.73 inches (4.39 cm) Width: 17.4 inches (44.19 cm) Length: 10.0 inches (25.4 cm) |
|
X435-8T-4S switch |
4.12 lb (1.87 kg) |
|
X435-8P-4S switch |
4.85 lb (2.2 kg) |
|
X435-8P-2T-W switch |
3.15 lb (1.43 kg) |
|
X435-24T-4S switch |
6.5 lb (2.95 kg) |
|
X435-24P-4S switch |
7.67 lb (3.48 kg) |
|
X435-8T-4S switch X435-8P-4S switch X435-8P-2T-W switch |
Height: 5.24 inches (13.3 cm) Width: 16.78 inches (42.6 cm) Length: 12.73 inches (32.3 cm) |
|
X435-24T-4S switch X435-24P-4S switch |
Height: 5.20 inches (13.2 cm) Width: 22.18 inches (56.3 cm) Length: 15.13 inches (38.4 cm) |
|
X435-8T-4S switch |
6 lb (2.72 kg) |
|
X435-8P-4S switch |
6.72 lb (3.05 kg) |
|
X435-8P-2T-W switch |
4.41 lb (2 kg) |
|
X435-24T-4S switch |
8.86 lb (4.02 kg) |
|
X435-24P-4S switch |
10.03 (4.55 kg) |
| Switch Model | Ambient Temp | PoE | Main Fan Speed (% of max) | PSU1 + PSU2 | Bystander Sound Pressure | Declared Sound Power (LWAd) |
|---|---|---|---|---|---|---|
|
X435-24P-4S switch |
25C | 370W | 45% | 1100W (½ of max PoE power | 45.4 | 56 |
|
Note: Acoustic noise
levels shown here represent noise emitted by the switch at room
ambient temperatures. Normal operating temperature range: 0°C to
45°C.
|
||||||
| Fan Speed | Fan Module RPM (typical) | Power | ||
|---|---|---|---|---|
| Inlet Fan | Outlet Fan | Typical | ||
| Full | 16,000 (typ) | 13,500 (typ) | 15.8W per module* | |
| Low | 3,200 (typ) | 2,800 (typ) | ||
* Some units are equipped with (1) fan module, while others are equipped with 2. Total fan power is equal to the number of installed fan modules multiplied by the fan power for each module.
| Switch Model | Nominal input ratings |
|---|---|
|
X435-8T-4S switch |
100 to 240 V |
|
X435-8P-4S switch |
100 to 240 V |
|
X435-8P-2T-W switch |
802.3bt PD input power 46-57VDC 1.8AX2:
|
|
X435-24T-4S switch |
100 to 240 V |
|
X435-24P-4S switch |
100 to 240 V |
| Switch Model | Minimum Heat Dissipation (BTU/hr) | Minimum Power Consumption (W) | Maximum Heat Dissipation (BTU/hr) | Maximum Power Consumption (W) |
|---|---|---|---|---|
|
X435-8T-4S switch |
257 | 75 | 963 | 1722 |
|
X435-8P-4S switch |
326 | 96 | 1614 | 3941 |
|
X435-8P-2T-W switch |
||||
|
X435-24T-4S switch |
236 | 61 | 1110 | 2485 |
|
X435-24P-4S switch |
|
Extreme Networks equipment does not ship with power cords. Click the following link for locating the correct power cord for purchase and use on specific Extreme Networks equipment. Specifications for power cords in each country are also provided within this link allowing end user to purchase cords locally. www.extremenetworks.com/product/powercords/ |
| Switch Model | Max PoE Budget |
|---|---|
| X435-8P-4S | 124W |
| X435-8P-2T-W | 100W* |
| X435-24P-4S | 370W |
* See the following table:
| Source Wattage (P9 + P10) |
Output (W) |
|---|---|
| 0+0 | 0W |
| 30+0 | 0W |
| 60+0 | 25W |
| 90+0 | 45W |
| 0+30 | 0W |
| 30+30 | 25W |
| 60+30 | 45W |
| 90+30 | 65W |
| 0+60 | 25W |
| 30+60 | 45W |
| 60+60 | 65W |
| 90+60 | 85W |
| 0+90 | 45W |
| 30+90 | 65W |
| 60+90 | 85W |
| 90+90 | 100W |
| CPU/Memory |
|---|
| ARM Cortex A9, 1.2 GHz CPU |
| 512MB DDR3 memory |
| 128MB Flash Memory |
| 512KB packet buffer per chip |
|
North American Safety of ITE |
UL 60950-1 2nd Ed., A2:2014 (US) CSA 22.2 No. 60950-1-07 2nd Ed. 2014-10(Canada) Complies with FCC 21CFR 1040.10 (US Laser Safety) CDRH Letter of Approval (US FDA Approval) |
|
European Safety of ITE |
IEC 60950-1:2005 2nd+A1:2009+A2:2013 IEC 60950-1:2006+A11+A1+A12+A2 EN 60825-1:2007 (Lasers Safety) |
|
International Safety of ITE |
CB Report & Certificate per IEC 60950-1:2005 2nd Ed., + National Differences AS/NZX 60950-1 (Australia /New Zealand) |
|
North America EMC for ITE |
FCC CFR 47 part 15 Class A (USA) ICES-003 Class A (Canada) |
|
European EMC standards |
EN 55032: 2015, Class A EN 55024:1998+A1:2001+A2:2003 EN 55035:2017 (Multimedia Equipment Immunity) Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11 EN 61000-3-2: 2006+A2:2009 (Harmonics) EN 61000-3-3:2008 (Flicker) ETSI EN 300 386: v1.4.1 (2008-04) (EMC Telecommunications) 2014/35/EU Low Voltage Directive |
|
International EMC certifications |
CISPR 32: 2015, Class A (International Emissions) EN 55024:1998+A1:2001+A2:2003 Class A (International Immunity) IEC/EN 61000-4-2:2008 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A IEC/EN 61000-4-3:2008 Radiated Immunity 10V/m, Criteria IEC/EN 61000-4-4:2004 Transient Burst, 1 kV, Criteria A IEC/EN 61000-4-5:2005 Surge, 2 kV L-L, 2 kV L-G, Level 3, Criteria A IEC/EN 61000-4-6:2008 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C |
|
Country-specific |
VCCI Class A (Japan Emissions) BSMI (Taiwan Emissions) ACMA (C-Tick) (Australia Emissions) CCC Mark (China) KCC Mark, EMC Approval (Korea) |
|
EN/ETSI 300 386:2008 (EMC Telecommunications) EN/ETSI 300 019 (Environmental for Telecommunications) MEF9 and MEF14 certified for EPL, EVPL, and ELAN |
|
IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3ae 10GBASE-X IEEE 802.3ba 40GBASE-X IEEE 802.3bz 2.5GBASE-T and 5GBASE-T (for X460-G2-16mp-32p-10GE4) IEEE 802.3at PoE Plus IEEE 802.3az (EEE) |
|
Environmental standards |
EN/ETSI 300 019-2-1 v2.1.2 (2000 - 2009) - Class 1.2 Storage EN/ETSI 300 019-2-2 v2.1.2 (1999 - 09) - Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.1.2 (2003 - 04) - Class 3.1e Operational EN/ETSI 300 753 (1997-10) - Acoustic Noise ASTM D3580 Random Vibration Unpackaged 1.5G |
|
Operating conditions |
Temperature range: 0°C to 40°C (32°F to 104°F) up to 3000 m (9,842 ft.) for X435-8T/8P-4S, and X435-8P-2T-W 0°C to 45°C (32°F to 113°F) up to 3000 m (9,842 ft) for X435-24T/24P-4S Humidity: 10% to 93% relative humidity, non-condensing Altitude: 0 to 3,000 meters (9,842 feet) Operational shock (half sine): 30 m/s2 (3 G), 11 ms, 60 shocks Operational random vibration: 3 to 500 Hz at 1.5 G rms |
|
Storage & transportation conditions (packaged) |
Transportation temperature: -40°C to 70°C (-40°F to 158°F) Storage and transportation humidity: 10% to 93% relative humidity, non-condensing Packaged shock (half sine): 180 m/s2 (18 G), 6 ms, 600 shocks Packaged sine vibration: 5 to 62 Hz at velocity 5 mm/s, 62 to 500 Hz at 0.2 G Packaged random vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct. from 20 to 200 Hz 14 drops minimum on sides and corners at 42 inches (<15 kg box) |
