Power Cord Requirements for AC-Powered
Switches and AC Power Supplies
An AC power cord is not included with the AC power supply.
Power cords used with AC-powered switches or AC power supplies must meet the following
requirements:
- The power cord must be
agency-certified for the country of use.
- The power cord must have an
IEC320-C15 connector for connection to the switch or power supply.
- The power cord must have an
appropriately rated and approved wall plug applicable to the country of
installation.
- For cords up to 14.76 feet (4.5
m) long, the wire size must be 15 AWG (2 mm2) minimum wire length
up to 4.9 feet (1.5 m).
For details about obtaining AC power cords for use in your country, refer to http://www.extremenetworks.com/product/powercords/.
