Installing an LRM/MACsec Adapter Vertically

About this task

Refer to Installing an LRM/MACsec Adapter for installation options for the LRM/MACsec Adapter.

To install an LRM/MACsec Adapter vertically in an equipment rack, follow these steps:

Procedure

  1. Using two rack mounting screws (not included), attach the vertical mounting bracket to the rack so that the mounting ear extends outward from the front of the rack.
  2. Using two small M4 x 6.5 mm screws (included), attach the bracket to the holes in the bottom of the adapter.
    The adapter ports can face upward or downward as needed.
  3. Connect the adapter to the switch, following the instructions in Connecting the LRM/MACsec Adapter to the Host Switch and to Power.