RPS-150XT Redundant Power Supply Technical Specifications

The following tables list the specifications for the 150 W RPS-150XT Redundant Power Supply unit (model 10932).

Table 1. Physical Specifications
Dimensions 4.1 H x 15.4 W x 30.0 D (cm) 1.61 H x 6.1 W x 11.8 D (in)
Weight (unit only) 1.5 kg (3.3 lb)
Weight (unit and packaging) approximately 3 kg (6.6 lb)
Table 2. Power Specifications
AC input frequency 50/60 Hz (range 47-63 Hz)
AC input voltage 100-240 V (range 90-264 V)
AC input current 2 A maximum (range 2 A at 100 V, 1 A at 200 V)
DC output +12.0 V, 13 A maximum
Maximum output power 156 W
Table 3. Environmental Specifications
Operating temperature 0°C to 60°C (32°F to 140°F)
Storage temperature -45°C to 85°C (-49°F to 185°F)
Operating relative humidity 10% to 90% operating/95% non-condensing

RPS-150XT Connector

See RPS-150XT Connector Pin Locations and RPS-150XT Connector Pin Functions for pin locations and function.

Note

Note

The following information is for troubleshooting purposes only. For proper operation, use only the RPS cable supplied with the RPS-150XT. This cable is specially designed for this application and meets all necessary regulatory and safety standards.
Caution

Caution

The use of non-approved cables will void your warranty.
Click to expand in new window
RPS-150XT Connector Pin Locations
1 = Pin 1 3 = Pin 8
2 = Pin 7 4 = Pin 14
Table 4. RPS-150XT Connector Pin Functions
Pin Function Pin Function
1 Ground 8 Spare pin
2 Spare pin 9 Spare pin
3 12 V power 10 Power present
4 12 V power 11 Start 1
5 12 V power 12 Start 2
6 12 V power 13 Power good
7 Ground 14 Ground