The LRM/MACsec Adapter (part no. 10965) can be attached to switch ports that are not LRM or MACsec capable, using a cable that is specifically designed for this purpose.
| Height | 3.00 cm (1.18 in) |
| Width | 7.60 cm (2.99 in) |
| Length | 12.35 cm (4.86 in) |
| Weight | 300 g (0.66 lb) |
| Operating temperature |
0°C to 40°C (32°F to 104°F) when used with the following optics
modules:
0°C to 45°C (32°F to 113°F) when used with all other supported optics modules |
| Storage and transportation temperature |
-40°C to 70°C (-40°F to 158°F) |
| Humidity |
10% to 95% relative humidity, non-condensing |
| Altitude |
0 to 3,000 meters (9,850 feet) |
|
North American Safety of ITE |
UL 62368-1:2014, Listed Device (US) UL 60950-1 2nd Ed., A2:2014, Listed Device (US) CAN/CSA 22.2 #62368-1-14:2014 Canada) |
|
European Safety of ITE |
EN 62368-1:2014 EN 60950-1:2006+A11+A1+A12+A2 IEC 62368-1:2014 IEC 60950-1:2005 2nd+A1:2009+A2:2013 2014/35/EU Low Voltage Directive |
| Part no. | 10966 |
| Height | 4.32 cm (1.70 in) |
| Width | 48.26 cm (19.00 in) |
| Length | 5.00 cm (1.97 in) |
| Weight | 487 g (1.07 lb) |