Installing an LRM/MACsec Adapter Horizontally
About this task
Refer to Installing an LRM/MACsec Adapter for installation options for the LRM/MACsec Adapter.
To install an LRM/MACsec Adapter horizontally in an equipment rack, follow these steps:
Using two small M 4 x 6.5 mm
screws (included), attach the bracket to the holes in one side of the adapter so
that the mounting ear extends away from the adapter.
Attaching the Mounting Bracket to the LRM/MACsec Adapter shows the bracket attached to the adapter.
Using two rack mounting screws
(not included) attach the mounting ear to the rack.
The adapter ports should face toward the front.
- Connect the adapter to the switch, following the instructions in Connecting the LRM/MACsec Adapter to the Host Switch and to Power.