V400 Virtual Port Extender Technical Specifications

The following V400 Virtual Port Extender models are available:

Table 1. V400 Unpackaged Dimensions
V400-24t-10GE2 Height: 1.70 in (4.32 cm)

Width: 9.97 in (25.3 cm)

Length: 17.34 in (44.0 cm)

V400-24p-10GE2 Height: 1.70 in (4.32 cm)

Width: 9.97 in (25.3 cm)

Length: 17.34 in (44.0 cm)

V400-48t-10GE4 Height: 1.70 in (4.32 cm)

Width: 9.97 in (25.3 cm)

Length: 17.34 in (44.0 cm)

V400-48p-10GE4 Height: 1.70 in (4.32 cm)

Width: 15.25 in (38.7 cm)

Length: 17.34 in (44.0 cm)

Table 2. V400 Unpackaged Weight
V400-24t-10GE2 6.62 lb (3.00 kg)
V400-24p-10GE2 9.08 lb (4.12 kg)
V400-48t-10GE4 7.14 lb (3.26 kg)
V400-48p-10GE4 14.06 lb (6.38 kg)
Table 3. V400 Packaged Dimensions
V400-24t-10GE2 Height: 4.49 in (11.4 cm)

Width: 14.66 in (37.2 cm)

Length: 22.02 in (55.9 cm)

V400-24p-10GE2 Height: 4.49 in (11.4 cm)

Width: 14.66 in (37.2 cm)

Length: 22.02 in (55.9 cm)

V400-48t-10GE4 Height: 4.49 in (11.4 cm)

Width: 14.66 in (37.2 cm)

Length: 22.02 in (55.9 cm)

V400-48p-10GE4 Height: 4.49 in (11.4 cm)

Width: 19.86 in (50.4 cm)

Length: 22.02 in (55.9 cm)

Table 4. V400 Packaged Weight
V400-24t-10GE2 9.00 lb (4.08 kg)
V400-24p-10GE2 11.44 lb (5.19 kg)
V400-48t-10GE4 9.69 lb (4.39 kg)
V400-48p-10GE4 16.56 lb (7.50 kg)

Power Specifications

Note

Note

When you use a redundant power supply (RPS), only redundant power – not additive power – is supported. Thus, the PoE ports load does not increase when an RPS is added.
Table 5. V400 Power Options
V400-24t-10GE2 AC Input: 100-240 VAC, 50/60 Hz, 0.6 A max
V400-24p-10GE2 AC Input: 100-240 VAC, 50/60 Hz, 2.2 A max
DC RPS input: 54 VDC, 18.52 A max
  • PoE ports load to 382 W for AC input only.
  • PoE ports load to 720 W for DC input only.
  • PoE ports load to 720 W for AC+DC input.
V400-48t-10GE4 AC Input: 100-240 VAC, 50/60 Hz, 1.0 A max
V400-48p-10GE4 AC Input: 100-240 VAC, 50/60 Hz, 12.0 - 6.0 A max
DC RPS input: 54 VDC, 18.52 A max
  • PoE ports load to 740 W for AC input only.
  • PoE ports load to 900 W for DC input only.
  • PoE ports load to 1440 W for AC+DC input.
Table 6. Power Specifications
Minimum1 Heat Dissipation (BTU/hr) Minimum1 Power Consumption (Watts) Maximum1 Heat Dissipation (BTU/hr) Maximum1 Power Consumption (Watts)
V400-24t-10GE2 35.8 10.5 82.9 24.3
V400-24p-10GE2 109.9 32.2 1658.3 486
V400-48t-10GE4 67.9 19.9 141.3 41.4
V400-48p-10GE4 186.0 54.5 3077.8 902
VX-RPS-1000 141.3 41.4 3152.8 924

Fan and Acoustic Sound

Table 7. Fan and Acoustic Sound
Bystander Sound Pressure2 in dB(A) Declared Sound Power (LWAd)2 in bels
V400-24t-10GE2 41.6 (Duty 30%) /

59.4 (max.)

4.4 (Duty 30%) /

6.2 (max.)

V400-24p-10GE2 47.5 (Duty 30%) /

64.0 (max.)

5.0 (Duty 30%) /

6.7 (max.)

V400-48t-10GE4 43.4 (Duty 30%) /

61.1 (max.)

4.6 (Duty 30%) /

6.4 (max.)

V400-48p-10GE4 48.5 (Duty 30%) /

65.5 (max.)

5.1 (Duty 30%) /

6.8 (max.)

Standards and Environmental Data

Table 8. Safety Standards

North American Safety of ITE

UL 60950-1 2nd Ed., A2:2014, Listed Device (US)

CSA 22.2 #60950-1-07 2nd Ed., 2014-10 Canada)

Complies with FCC 21CFR 1040.10 (US Laser Safety)

CDRH Letter of Approval (US FDA Approval)

European Safety of ITE

EN 60950-1:2006 +A11+A1+A12+A2

EN 60825-1:2007 (Lasers Safety)

IEC 60950-1:2005 2nd+A1:2009+A2:2013

2014/35/EU Low Voltage Directive

International Safety of ITE

CB Report & Certificate per IEC 60950-1:2005 2nd Ed. + National Differences

AS/NZX 60950-1 (Australia /New Zealand)

Table 9. V400 Environmental Data
Operating conditions Temperature: 0°C to 50°C (32°F to 122°F) for non-PoE models

Temperature: 0°C to 45°C (32°F to 113°F) for PoE models

Storage and transportation temperature: -40°C to 70°C (-40°F to 158°F)

Humidity: 5% to 95% relative humidity, non-condensing

Altitude: 0 to 3,000 meters (9,850 feet)


1 Minimum is defined as idle, with no ports linked. Maximum is defined as fans high, all ports 100% traffic.
2 At 25°C and 50% PoE load where applicable