Connecting a SummitStack Cable to a Stacking Port

About this task

SummitStack cables are used to connect 20-Gbps SummitStack ports on the X460-G2 switch with the SummitStack plug-in module.

To connect a SummitStack cable, follow these steps:

Align the cable connector with the stacking port connector on the rear of the first switch (see Connecting a SummitStack Cable).
Firmly press the cable connector into place on the mating stacking port connector.
Align and tighten the retaining screws on the cable connector.
Repeat steps 1 through 3 to connect the cable to the second switch.

Connecting a SummitStack Cable

Caution
Avoid making sharp bends in the cable. Sharp bends can stress the cable and cause damage.