Install a V300-8P-2T-W Model in a DIN Rail Mount

You need the following tools and materials to install a V300 Virtual Port Extender to a DIN Rail mount:

  • ESD-preventive wrist strap
  • M4 #2 Phillips screwdriver (magnetic screwdriver recommended)

There are two DIN Rail mounting options. To install a V300-8P-2T-W model in a DIN Rail Mount:

  1. Remove all contents of the DIN Rail Mount Kit (XN-DIN-MT-V300).
  2. For option 1, attach the DIN mounting bracket to the rear of the port extender using the two screws (included) for each bracket:
    Click to expand in new window
    DIN Rail Mounting Option 1: Attach the Bracket
  3. Align the DIN bracket with the DIN rail and attach the port extender:
    Click to expand in new window
    DIN Rail Mounting Option 1: Secure the Port Extender
  4. For option 2, attach the DIN mounting bracket to the side panel of the port extender:
    Click to expand in new window
    Din Rail Mounting Option 2: Attach the Bracket
  5. Align the DIN bracket with the DIN rail and attach the port extender:
    Click to expand in new window
    DIN Rail Mounting Option 2: Secure the Port Extender
  6. When power is connected, verify that the SYS LED on the port extender turns green.