Installing an EPS-C2 Chassis
About this task
To mount the EPS-C2 chassis in a 19-inch rack, follow these steps:
- Place the EPS-C2 chassis upright on a secure work surface.
- Remove the mounting bracket kit from the packaging.
Attach the mounting brackets as follows:
- Place a mounting bracket over the mounting holes on one side of the EPS-C2 (see Attaching the Mounting Bracket to the EPS-C2 Chassis).
Insert the screws and fully tighten them
using a screwdriver.
- Attach the mounting bracket for the other side of the EPS-C2.
- Slide the EPS-C2 into the rack and secure it using appropriate rack-mount screws.