Summit 550 W Power Supplies Technical Specifications

The following power supplies are available for use in X670-G2 series switches:

Table 1. Physical Specifications
Dimensions Height: 1.57 inches (4.0 cm)

Width: 3.07 inches (7.8 cm)

Depth: 13.31 inches (33.8 cm)
Weight 3.64 lb (1.65 kg)
Table 2. AC Power Specifications (Models 10925 and 10927)
Voltage input range 90 to 264 V
Nominal input ratings 100 to 240 V , 50 to 60 Hz, 8 A
Nominal input current at full loads 8 A @ 90 V (low-line), 4 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Maximum inrush current 15 A at 25°C (77°F)
Output 12 V , 45 A max, 540 Watts, 3 V , 3 A max, 10 Watts

Maximum continuous DC output shall not exceed 550 Watts.
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to Power Cord Requirements for AC-Powered Switches and AC Power Supplies.
Power supply cord gauge 18 AWG (0.75 mm2) up to 6 feet or 2 meters

or

16 AWG (1.0 mm2) over 6 feet
Efficiency 87% at 110 V with full load

88% at 220 V with full load
Table 3. DC Power Specifications (Models 10926 and 10928)
Nominal Input –40 V to –60 V, 18 A
DC Voltage Input Range –36 to –75 V
Maximum Input Amperages 18 A @ 36 V , 13.5 A @ 48 V

8.5 A @ 75 V

Inrush Current 25 A peak
Inrush Energy 0.625 A2S
Minimum wire size 14 AWG (1.5 mm2) copper stranded
DC Output 12 V , 45 A/3.3 V , 3.0 A
DC Output Power (W) 550 W
Table 4. Environmental Specifications
Operating temperature 0°C to 45°C (normal operation)
Storage temperature -40°C to 70°C
Operating humidity 20% to 90% relative humidity, non-condensing
Operating altitude Up to 10,000 feet
Operational shock
Frequency Range 5 to 350 Hz, 200 to 2000 Hz PSD: 0.0001g2/Hz

350 to 500 Hz -6dB/Octave, 500 Hz 0.000052 Hz
Acceleration 0.21.0 gRMS (Typical Level)

Duration: 20 min per axis
121248-05 Rev. AN