configure elrp-client one-shot {vlan}vlan_name ports [ports | all |none] {remote-endpoints vxlan all} {interval interval {seconds | milliseconds}} {retry count} {log | print | print-and-log]}
run elrp {vlan}vlan_name ports [ports |all | none] {remote-endpoints vxlan all} {interval interval {seconds | milliseconds} } {retry count}
These commands start one-time, non-periodic ELRP packet transmission on the specified ports of the VLAN using the specified count and interval. If any of these transmitted packets is returned, indicating loopback detection, the ELRP client performs the configured actions of logging a message in the system log file and/or printing a log message to the console. There is no need to trap to the SNMP (Simple Network Management Protocol) manager for non-periodic requests.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB