Platform Configuration

This section provides the CLI based policy configuration on the following platforms:

Student Fixed Switch
Faculty Fixed Switch
Services Edge Switch
Distribution Switch

In CLI mode, configuration takes place on each platform. When using the Extreme Management Center Policy Manager, configuration takes place at a central location and is pushed out to the appropriate network devices. For this configuration example, CoS (Class of Service) related configuration will be specified as a final CoS. See the QoS (Quality of Service) Configuration feature guide located at http://documentation.extremenetworks.com for a complete discussion of QoS configuration.

Note

CLI command prompts used in this configuration example have the following meaning:

System->—Input on all platforms used in this example.
Fixed Switch->—Input on all Fixed Switches.
StudentFS->—Input on the student Fixed Switch.
FacultyFS->—Input on the faculty Fixed Switch.
Services->—Input on the services S-Series device.
Distribution->—Input on the distribution S-Series device.

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback