The show management command displays whether or not CLI scripting is enabled, whether or not the configuration is persistent, and the CLI scripting error mode as shown in the following example:
show management switch # show management CLI idle timeout : Enabled (20 minutes) CLI max number of login attempts : 5 CLI max number of sessions : 16 CLI paging : Enabled (this session only) CLI space-completion : Disabled (this session only) CLI configuration logging : Disabled CLI scripting : Disabled (this session only) CLI scripting error mode : Ignore-Error (this session only) CLI persistent mode : Persistent (this session only) CLI prompting : Enabled (this session only) Telnet access : Enabled (tcp port 23 vr all) : Access Profile : not set SSH Access : Enabled (Key valid, tcp port 22 vr all) Web access : Enabled (tcp port 80) Total Read Only Communities : 1 Total Read Write Communities : 1 RMON : Disabled SNMP access : Enabled : Access Profile Name : not set SNMP Traps : Enabled SNMP v1/v2c TrapReceivers : Destination Source IP Address Flags 10.255.43.38 /10550 2E 10.255.43.11 /10550 2E 10.255.99.13 /10550 2E 10.255.57.2 /10550 2E 10.255.43.15 /10550 2E 10.255.42.81 /10550 2E Flags: Version: 1=v1 2=v2c Mode: S=Standard E=Enhanced SNMP stats: InPkts 0 OutPkts 6 Errors 0 AuthErrors 0 Gets 0 GetNexts 0 Sets 0 Drops 0 SNMP traps: Sent 6 AuthTraps Enabled
Print
this page
Email this topic
Feedback
View PDF
Download EPUB