OSPF Configuration Example

OSPF Configuration Example is an example of an autonomous system using OSPF (Open Shortest Path First) routers. The details of this network follow.

Click to expand in new window
OSPF Configuration Example
GUID-6C9B36DA-14ED-49D4-B13F-104FD3134FE6-low.png

Area 0 is the backbone area. It is located at the headquarters and has the following characteristics:

  • Two internal routers (IR1 and IR2)
  • Two area border routers (ABR 1 and ABR 2)
  • Network number 10.0.x.x
  • Two identified VLANs (HQ_10_0_2 and HQ_10_0_3)

Area 5 is connected to the backbone area by way of ABR 1 and ABR 2. It is located in Chicago and has the following characteristics:

  • Network number 160.26.x.x
  • One identified VLAN (Virtual LAN) (Chi_160_26_26)
  • Two internal routers

Area 6 is a stub area connected to the backbone by way of ABR 1. It is located in Los Angeles and has the following characteristics:

  • Network number 161.48.x.x
  • One identified VLAN (LA_161_48_2)
  • Three internal routers
  • Uses default routes for inter-area routing

Configuration for ABR 1 and Configuration for IR 1 provide two router configurations for the example in OSPF Configuration Example.