IEEE 802.1AG (CFM MIB)

This MIB contains objects for the 802.1ag protocol.

The following tables, groups, and variables are supported in this MIB.

Table/Group Supported Variables Comments
dot1agCfmMdTable dot1agCfmMdIndex The index to the Maintenance Domain (MD) table.
  dot1agCfmMdFormat Supported as read only. The type (and thereby format) of the MD name.
  dot1agCfmMdName Supported as read only. The MD name.
  dot1agCfmMdMdLevel Supported as read only. The MD Level.
  dot1agCfmMdMhfCreation Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this MD. Supported as read only. Configuration in CLI is not supported. The defMHFdefault (2) value is returned.
  dot1agCfmMdMhfIdPermission Supported as read only. Configuration in CLI is not supported. The sendIdChassisManage (4) value is returned.
  dot1agCfmMdMaNextIndex Value to be used as the index of the Maintenance Association (MA) table entries.
  dot1agCfmMdRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.
dot1agCfmMdTableNextIndex dot1agCfmMdTableNextIndex An unused value for dot1agCfmMdIndex that is used as the MD index for the next newly created domain.
dot1agCfmMaNetTable dot1agCfmMdIndex MD index.
  dot1agCfmMaIndex Index of the MA table. dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.
  dot1agCfmMaNetFormat Supported as read only. The type of the MA name.
  dot1agCfmMaNetName Supported as read only. MA name.
  dot1agCfmMaNetCcmInterval Supported as read only. Transmission interval between CCMs to be used by all MEPs in the MA.
  dot1agCfmMaNetRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.
dot1agCfmMepTable dot1agCfmMdIndex MD Index.
  dot1agCfmMaIndex MA Index.
  dot1agCfmMepIdentifier A small integer, unique over a given MA identifying a specific MA end point.
  dot1agCfmMepIfIndex Supported as read only. Interface index of the interface bridge port.
  dot1agCfmMepDirection Supported as read only. The direction in which the MEP faces on the bridge port.
  dot1agCfmMepPrimaryVid Supported as read only. VID of the MEP.
  dot1agCfmMepActive Supported as read only. Administrative state of the MEP.
  dot1agCfmMepFngState Current state of the MEP Fault Notification Generator State Machine. Can have any one of the following values:fngReset (1)fngDefect (2)fngReportDefect (3)fngDefectReported (4)fngDefectClearing (5)
  dot1agCfmMepCciEnabled Supported as read only. If set to true, the MEP will generate CCM.
  dot1agCfmMepCcmLtmPriority Supported as read only. The priority value for CCMs and LTMs transmitted by the MEP. Configuration in CLI is not supported. Default value 0 is returned.
  dot1agCfmMepMacAddress MAC address of the MEP. In Extreme Networks switches, the MAC is returned.
  dot1agCfmMepLowPrDef Supported as read only. An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm. Configuration in CLI is not supported. Default VLAN macRemErrXon is returned.
  dot1agCfmMepFngAlarmTime Supported as read only. The time that defects must be present before a Fault Alarm is issued. Configuration in CLI is not supported. Default value 2.5 seconds is returned.
  dot1agCfmMepFngResetTime Supported as read only. The time that defects must be absent before resetting a Fault Alarm. Configuration in CLI is not supported. Default value 10 seconds is returned.
  dot1agCfmMepHighestPrDefect The highest priority defect that has been present. Possible values are:none (0)defRDICCM (1)defMACstatus (2)defRemoteCCM (3)defErrorCCM (4)defXconCCM (5)
  dot1agCfmMepDefects Error condition to be sent. The conditions can be any one of the following:bDefRDICCM (0)bDefMACstatus (1)bDefRemoteCCM (2)bDefErrorCCM (3)bDefXconCCM (4)
  dot1agCfmMepErrorCcmLastFailure The last-received CCM that triggered a DefErrorCCM fault.
  dot1agCfmMepXconCcmLastFailure The last-received CCM that triggered a DefXconCCM fault.
  dot1agCfmMepCcmSequenceErrors The total number of out-of-sequence CCMs received from all remote MEPs.
  dot1agCfmMepCciSentCcms The total number of Continuity Check messages transmitted.
  dot1agCfmMepNextLbmTransId Next sequence number/transaction identifier to be sent in a Loopback message.
  dot1agCfmMepLbrIn The total number of valid, in-order Loopback Replies received.
  dot1agCfmMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies received.
  dot1agCfmMepLbrBadMsdu The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM.
  dot1agCfmMepLtmNextSeqNumber Next transaction identifier/sequence number to be sent in a Linktrace message.
  dot1agCfmMepUnexpLtrIn The total number of unexpected LTRs received.
  dot1agCfmMepLbrOut The total number of Loopback Replies transmitted.
  dot1agCfmMepTransmitLbmStatus Supported as read only. A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted.
 

dot1agCfmMepTransmitLbmDestMac

Address

Supported as read only. The target MAC address field to be transmitted.
  dot1agCfmMepTransmitLbmDestMepId Supported as read only. To transmit the LBM, destMEPID need not be given.
  dot1agCfmMepTransmitLbmDestIsMepId Supported as read only. This always returns FALSE.
  dot1agCfmMepTransmitLbmMessages Supported as read only. The number of Loopback messages to be transmitted.
  dot1agCfmMepTransmitLbmDataTlv Supported as read only. An arbitrary amount of data to be included in the Data TLV if the Data TLV is selected to be sent. This returns 0.
  dot1agCfmMepTransmitLbmVlanPriority Priority. A three-bit value to be used in the VLAN tag, if present in the transmitted frame. Configuration in CLI is not supported. Default value 0 is returned.
  dot1agCfmMepTransmitLbmVlanDropEnable Not supported. Returns FALSE.
  dot1agCfmMepTransmitLbmResultOK Indicates the result of the operation linked with MEP active state.
  dot1agCfmMepTransmitLbmSeqNumber The Loopback Transaction Identifier of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResultOK is false.
  dot1agCfmMepTransmitLtmStatus Supported as read only. A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted.
  dot1agCfmMepTransmitLtmFlags Supported as read only. The flags field for LTMs transmitted by the MEP. Currently, useFDBonly (0) is supported.
  dot1agCfmMepTransmitLtmTargetMacAddress Supported as read only. The target MAC address field to be transmitted.
  dot1agCfmMepTransmitLtmTargetMepId Not supported. To transmit the LTM destMEPID need not be given. Value 0 is returned.
  dot1agCfmMepTransmitLtmTargetIsMepId Not supported. This always returns FALSE.
  dot1agCfmMepTransmitLtmTtl Supported as read only. The LTM TTL field.
  dot1agCfmMepTransmitLtmResult Supported as read only. Indicates the result of the operation. Linked with MEP active state.
  dot1agCfmMepTransmitLtmSeqNumber The LTM transaction identifier.
  dot1agCfmMepTransmitLtmEgressIdentifier Supported as read only. Identifies the MEP Linktrace Initiator that is originating or the Linktrace Responder that is forwarding this LTM.
  dot1agCfmMepRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.
dot1agCfmMepDbTable dot1agCfmMdIndex MD Index.
  dot1agCfmMaIndex MA Index.
  dot1agCfmMepIdentifier MA end point identifier.
  dot1agCfmMepDbRMepIdentifier Maintenance association end point identifier of a remote MEP whose information from the MEP database is to be returned.
  dot1agCfmMepDbRMepState The operational state of the remote MEP IFF state machines. The state can be any one of the following:rMepIdle (1)rMepStart (2)rMepFailed (3)rMepOk (4)
  dot1agCfmMepDbRMepFailedOkTime The time (SysUpTime) at which the IFF remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state.
  dot1agCfmMepDbMacAddress The MAC address of the remote MEP.
  dot1agCfmMepDbRdi State of the RDI bit in the last received CCM.
  dot1agCfmMepDbPortStatusTlv An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value. The value is one of the following:psNoPortStateTLV (0)psBlocked (1)psUp (2)
  dot1agCfmMepDbInterfaceStatusTlv An enumerated value of the Interface status TLV received in the last CCM from the remote MEP. The value can be one of the following:isNoInterfaceStatusTLV (0)isUp (1)isDown (2)isTesting (3)isUnknown (4)isDormant (5)isNotPresent (6)isLowerLayerDown (7)
  dot1agCfmMepDbChassisIdSubtype networkAddress (5) is returned if senderIDTLV is received.
  dot1agCfmMepDbChassisId The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order.
  dot1agCfmMepDbManAddressDomain Not supported. Value zero is returned.
  dot1agCfmMepDbManAddress Not supported. Value zero is returned.
dot1agCfmLtrTable dot1agCfmMdIndex MD Index.
  dot1agCfmMaIndex MA Index.
  dot1agCfmMepIdentifier MA end point identifier.
  dot1agCfmLtrSeqNumber Transaction identifier/sequence number returned by a previous transmit linktrace message command.
  dot1agCfmLtrReceiveOrder An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value.
  dot1agCfmLtrTtl TTL field value for a returned LTR.
  dot1agCfmLtrForwarded Indicates if a LTM was forwarded by the responding MP.
  dot1agCfmLtrTerminalMep Not supported. Value FALSE is returned.
  dot1agCfmLtrLastEgressIdentifier An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR.
 

dot1agCfmLtrNextEgressIdentifier

An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR.

  dot1agCfmLtrRelay Value returned in the Relay Action field.
  dot1agCfmLtrChassisIdSubtype networkAddress (5) is returned if senderIDTLV is received.
  dot1agCfmLtrChassisId The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order.
  dot1agCfmLtrManAddressDomain Not supported. Value zero is returned.
  dot1agCfmLtrManAddress Not supported. Value zero is returned.
  dot1agCfmLtrIngress The value returned in the Ingress Action Field of the LTM.
  dot1agCfmLtrIngressMac MAC address returned in the ingress MAC address field.
  dot1agCfmLtrIngressPortIdSubtype interfaceName (5) is returned if present.
  dot1agCfmLtrIngressPortId interfaceName (5), then the octet string identifies a particular instance of the ifName object. If the particular ifName object does not contain any values, another port identifier type should be used.
  dot1agCfmLtrEgress The value returned in the Egress Action Field of the LTM.
  dot1agCfmLtrEgressMac MAC address returned in the egress MAC address field.
  dot1agCfmLtrEgressPortIdSubtype interfaceName (5) is returned if present.
  dot1agCfmLtrEgressPortId interfaceName (5), then the octet string identifies a particular instance of the ifName object. If the particular ifName object does not contain any values, another port identifier type should be used.
  dot1agCfmLtrOrganizationSpecificTlv All organization specific TLVs returned in the LTR.
dot1agCfmStackTable dot1agCfmStackifIndex Index object. This object represents the bridge port or aggregated port on which MEPs or MHFs might be configured.
  dot1agCfmStackVlanIdOrNone Index object. VLAN ID to which the MP is attached.
  dot1agCfmStackMdLevel Index object. MD Level of the Maintenance Point.

dot1agCfmStackDirection Index object. Direction in which the MP faces on the bridge port.
  dot1agCfmStackMdIndex The index of the MD in the dot1agCfmMdTable to which the MP is associated.
  dot1agCfmStackMaIndex The index of the MA in the dot1agCfmMaNetTable and dot1agCfmMaCompTable to which the MP is associated.
  dot1agCfmStackMepId If an MEP is configured, the MEP ID.
  dot1agCfmStackMacAddress MAC address of the MP.
dot1agCfmMaMepListTable dot1agCfmMdIndex MD Index.
  dot1agCfmMaIndex MA Index.
  dot1agCfmMaMepListIdentifier MEP identifier.
  dot1agCfmMaMepListRowStatus  

dot1agCfmFaultAlarm

(NOTIFICATION)

dot1agCfmMepHighestPrDefect

A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault.

The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification:

dot1agCfmMdIndex—Also the index of the MEPs.MD table entry (dot1agCfmMdTable).dot1agCfmMaIndex—Also an index (with the MD table index) of the MEP's MA network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry.dot1agCfmMepIdentifier—MEP Identifier and final index into the MEP table (dot1agCfmMepTable).

extremeCfmMibConformance    
dot1agCfmMaCompTable   Not supported

dot1agCfmConfigErrorList

Table
  Not supported
dot1agCfmVlanTable   Not supported
dot1agCfmDefaultMdTable   Not supported