Verifying the EAPS Configuration and Operating State

  1. When the configuration is complete, confirm that the EAPS (Extreme Automatic Protection Switching) domain and shared port configuration is correct.
  2. Verify whether the EAPS state is Complete and the shared port status is Ready.
    Both ring ports must be plugged in to see the Links-Up state. This verification is performed on both aggregate switches.

    EAPS master and partner node status verification example:

    * AGG-SWITCH#2.63 # show eaps
    EAPS Enabled: Yes
    EAPS Fast-Convergence: Off
    EAPS Display Config Warnings: On
    EAPS Multicast Add Ring Ports: Off
    EAPS Multicast Send IGMP Query: On
    EAPS Multicast Temporary Flooding: Off
    EAPS Multicast Temporary Flooding Duration: 15 sec
    Number of EAPS instances: 4
    # EAPS domain configuration :
    --------------------------------------------------------------------------------
    Domain State Mo En Pri Sec Control-Vlan VID Count
    --------------------------------------------------------------------------------
    e1-domain Complete M Y 2:1 1:1 control-1 (4001) 1
    e2-domain Complete M Y 2:1 1:4 control-2 (4002) 2
    e3-domain Complete M Y 2:1 3:1 control-3 (4003) 2
    e4-domain Complete M Y 2:1 3:2 control-4 (4004) 2
    --------------------------------------------------------------------------------
    * AGG-SWITCH#2.64 # show eaps shared-port
    EAPS shared-port count: 1
    --------------------------------------------------------------------------------
    Link Domain Vlan RB RB
    Shared-port Mode Id Up State count count Nbr State Id
    --------------------------------------------------------------------------------
    2:1 Partner 21 Y Ready 4 4 Yes None None
    --------------------------------------------------------------------------------
    

    EAPS transit and controller node status verification example:

    * AGG-SWITCH#1.63 # show eaps
    EAPS Enabled: Yes
    EAPS Fast-Convergence: Off
    EAPS Display Config Warnings: On
    EAPS Multicast Add Ring Ports: Off
    EAPS Multicast Send IGMP Query: On
    EAPS Multicast Temporary Flooding: Off
    EAPS Multicast Temporary Flooding Duration: 15 sec
    Number of EAPS instances: 4
    # EAPS domain configuration :
    ----------------------------------------------------------------------------
    Domain State Mo En Pri Sec Control-Vlan VID Count
    ----------------------------------------------------------------------------
    e1-domain Links-Up M Y 2:1 1:1 control-1 (4001) 1
    e2-domain Links-Up M Y 2:1 1:4 control-2 (4002) 2
    e3-domain Links-Up M Y 2:1 3:1 control-3 (4003) 2
    e4-domain Links-Up M Y 2:1 3:2 control-4 (4004) 2
    ----------------------------------------------------------------------------
    * AGG-SWITCH#1.64 # show eaps shared-port
    EAPS shared-port count: 1
    ----------------------------------------------------------------------------
    Link Domain Vlan RB RB
    Shared-port Mode Id Up State count count Nbr State Id
    ----------------------------------------------------------------------------
    2:1 Controller 21 Y Ready 4 4 Yes None None
    ----------------------------------------------------------------------------