Creating and Configuring the EAPS Shared Ports
Create the EAPS (Extreme Automatic Protection Switching) shared ports,
which are used to connect a common-link between the aggregate switches.
On the first switch, define the shared port mode
as partner, and define the link ID. Repeat this step on the other aggregate switch, but
configure the shared port mode as controller. The link ID matches the value configured for
the partner.
The following shows an example configuration for
the
partner:
* AGG-SWITCH#2.37 # create eaps shared-port 2:1
* AGG-SWITCH#2.38 # configure eaps shared-port 2:1 mode partner
* AGG-SWITCH#2.39 # configure eaps shared-port 2:1 link-id 21
Print
this page
Email this topic
Feedback
View PDF
Download EPUB