Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

Displaying Port PoE Statistics

To display the PoE (Power over Ethernet) statistics for each port, run the show inline-power stats ports port_list command. The command provides the following information:

  • State—Displays the port power state:

    • Disabled

    • Searching

    • Delivering

    • Faulted

    • Disconnected

    • Other

    • Denied

  • PD‘s power class—Displays the class type of the connected PD:

    • “-----”: disabled or searching

    • “class0”: class 0 device

    • “class1”: class 1 device

    • “class2”: class 2 device

    • “class3”: class 3 device

    • “class4”: class 4 device

  • Absent—Displays the number of times the port was disconnected.

  • InvSig—Displays the number of times the port had an invalid signature.

  • Denied—Displays the number of times the port was denied.

  • Over-current—Displays the number of times the port entered an overcurrent state.

  • Short—Displays the number of times the port entered undercurrent state.

Published March 2020prev | next

Email this topicEmail this topic

Print this pagePrint this page