Removing a Node from a Stack
To remove a node from a stack, follow these
steps:
-
Determine if the target node to be removed is using the
SummitStack-V feature by issuing the show stacking
stack-ports command.
Examine the Select column to see whether the
target node is using alternate (non-native) stacking ports.
-
If the target node is using alternate stacking ports, do
the following:
-
Log into the target node and issue the command: unconfigure stacking-support
-
Log out of the target node.
Note
Do not reboot the target node at this
time.
-
Log into the master node.
-
Delete the target node stacking configuration by entering
the following command:
unconfigure
stacking {node-address node_address | slot slot_number}
-
Reboot the target node by entering the following command:
reboot [node
node-address | slot slot-number]
-
Disconnect the node from the stack, and redeploy it as
needed.