Any network manager program running the SNMP (Simple Network Management Protocol) can manage the switch if the Management Information Base (MIB) is installed correctly on the management station.
Note
When using a network manager program to create a VLAN (Virtual LAN), we do not support the SNMP createAndWait operation. To create a VLAN with SNMP, use the createAndGo operation.createAndGo is one of six values in the RowStatus column of SMIv2 tables. createAndGo is supplied by a manager wishing to create a new instance of a conceptual row and have its status automatically set to active in order to make it available for use by the managed device
The following sections describe how to get started if you want to use an SNMP manager. It assumes you are already familiar with SNMP management.
Note
Perform a save operation if you make any configurations using SNMP mibs. If you do not save, some of the configurations may not survive when you reboot.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB