Enabling and Disabling RADIUS Accounting

After you configure the RADIUS (Remote Authentication Dial In User Service) client with the RADIUS accounting server information, you must enable accounting in the RADIUS client before the switch begins transmitting the information. You must enable RADIUS authentication in the client for accounting information to be generated. You can enable and disable accounting without affecting the current state of RADIUS authentication.

To enable RADIUS accounting, use the following command:
enable radius-accounting {mgmt-access | netlogin}
To disable RADIUS accounting, use the following command:
disable radius-accounting {mgmt-access | netlogin}

If you do not specify a keyword, RADIUS accounting is enabled or disabled on the switch for both management and network login.

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback