The uplink ports send traffic to and from the supplicants from the core of the network. Uplink ports should not be configured for network login (network login is disabled on uplink ports).
To specify one or more ports as tagged uplink ports that are added to the dynamically created VLAN (Virtual LAN), use the following command:
configure netlogin dynamic-vlan uplink-ports [port_list | none]
By default, the setting is none.
If you specify an uplink port with network login enabled, the configuration fails and the switch displays an error message similar to the following:
ERROR: The following ports have NetLogin enabled: 1, 2
If this occurs, select a port with network login disabled.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB