Creating an RSVP-TE Path

To create an RSVP-TE routed path resource, use the following command:
create mpls rsvp-te path path_name

The path_name parameter is a character string that is to used to identify the path within the switch. The path_name string must begin with an alphabetic character, and can contain up to 31 additional alphanumeric characters. The RSVP-TE LSP is not signaled along the path until an LSP adds the specified path name. The maximum number of configurable paths is 1000.
To delete an RSVP-TE path, use the following command:
delete mpls rsvp-te path [path_name | all]

This command deletes a configured MPLS (Multiprotocol Label Switching) RSVP-TE routed path with the specified path_name. All associated configuration information for path_name is deleted. A path cannot be deleted as long as the path_name is associated with an LSP. If the all keyword is specified, all paths not associated with an LSP are deleted.

Published March 2020prev | next