Adding and Deleting a Master VLAN

The master VLAN (Virtual LAN) is the VLAN on the ESRP (Extreme Standby Router Protocol) domain that exchanges ESRP PDUs and data between a pair of ESRP-enabled devices. You must configure one master VLAN for each ESRP domain, and a master VLAN can belong to only one ESRP domain.

To add a master VLAN to an ESRP domain, use the following command:

configure esrp esrpDomain add master vlan_name

The esrpDomain parameter specifies the name of the ESRP domain, and the vlan_name parameter specifies the name of the master VLAN.
To delete a master VLAN, you must first disable the ESRP domain before removing the master VLAN using the disable esrp {esrpDomain} command.
To delete a master VLAN from an ESRP domain, use the following command:.

configure esrp esrpDomain delete master vlan_name

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback