Enabling and Disabling an EAPS Domain

We recommend that you keep the loop protection warning messages enabled. If you have considerable knowledge and experience with EAPS (Extreme Automatic Protection Switching), you might find the EAPS loop protection warning messages unnecessary.

To enable a specific EAPS domain, use the following command:
enable eaps {name}
To disable a specific EAPS domain, use the following command:
disable eaps {name}
If you enter the disable eaps command, the default switch configuration displays the following warning message and prompts you to confirm the command:
```
WARNING: Disabling specific EAPS domain could cause a loop in the network! Are you sure you want to disable this specific EAPS domain? (y/n)
```
When prompted, do one of the following:
1. Enter y to disable EAPS for the specified domain.
2. Enter n or press [Return] to cancel the command.

For more information see, Disabling EAPS Loop Protection Warning Messages.

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback