Creating PVLANs

To create a VLAN (Virtual LAN), you need to do the following:

To create a PVLAN, use the following command:
create private-vlan name {vr vr_name}
To add a network VLAN to the PVLAN, create and configure a tagged VLAN, and then use the following command to add that network VLAN:
configure private-vlan name add network vlan_name
To add a subscriber VLAN to the PVLAN, create and configure a tagged VLAN, and then use the following command to add that subscriber VLAN:
configure private-vlan name add subscriber vlan_name {non-isolated} {loopback-port port}

By default, this command adds an isolated subscriber VLAN. To create a non-isolated subscriber VLAN, you must include the non-isolated option.

Published March 2020prev | next