The following configuration example shows the Extreme Networks switch configuration needed to support the MAC-based network login example.
create vlan “temp” create vlan “corp” configure vlan “default” delete ports 4:1-4:4 # Configuration Information for VLAN corp # No VLAN-ID is associated with VLAN corp. configure vlan “corp” ipaddress 10.203.0.224 255.255.255.0 # Network Login Configuration configure netlogin vlan “temp” enable netlogin mac enable netlogin ports 4:1-4:4 mac configure netlogin add mac-list default <password> # RADIUS Client Configuration configure radius netlogin primary server 10.0.1.2 1812 client-ip 10.10.20.30 vr “VR-Mgmt” configure radius netlogin primary shared-secret purple enable radius
The following example is a user's file entry for a specific MAC address on a FreeRADIUS server:
00E018A8C540 Auth-Type := Local, User-Password == "00E018A8C540"
Note
For information about how to use and configure your RADIUS (Remote Authentication Dial In User Service) server, refer to Configuring the RADIUS Client and the documentation that came with your RADIUS server.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB