Requirements and Limitations
The configuration
in
the following figure has the following requirements and limitations:
- The VPLS nodes with STP (Spanning Tree Protocol) redundancy (Switches S1 and S2) must
always be the lowest priority STP bridges to ensure that STP port blocking is done by one of
the VPLS nodes. For example, the following priorities for the nodes
in
the following figure will work correctly: S1, priority 8192; S2, priority
4096; R1, priority 32768; and R2, priority 32768.
- For VPLS STP redundancy to work properly, the VPLS nodes must be
directly connected to the STP nodes. For example, if a node R3 is added between S2 and R2,
node S2 cannot directly detect a failure of the link between R3 and R2.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB