Before you can use Extreme Networks VSAs on a RADIUS (Remote Authentication Dial In User Service) server, you must define the VSAs.
On the FreeRADIUS server, you define the VSAs in the dictionary file in the /etc/raddb directory. You must define the vendor ID for Extreme Networks, each of the VSAs you plan to use, and the values to send for the VSAs. The following example shows the entries to add to a FreeRADIUS server dictionary file for Extreme Networks VSAs:
VENDOR Extreme 1916 ATTRIBUTE Extreme-CLI-Authorization 201 integer Extreme ATTRIBUTE Extreme-Shell-Command 202 string Extreme ATTRIBUTE Extreme-Netlogin-Vlan 203 string Extreme ATTRIBUTE Extreme-Netlogin-Url 204 string Extreme ATTRIBUTE Extreme-Netlogin-Url-Desc 205 string Extreme ATTRIBUTE Extreme-Netlogin-Only 206 integer Extreme ATTRIBUTE Extreme-User-Location 208 string Extreme ATTRIBUTE Extreme-Netlogin-Vlan-Tag 209 integer Extreme ATTRIBUTE Extreme-Netlogin-Extended-Vlan 211 string Extreme ATTRIBUTE Extreme-Security-Profile 212 string Extreme VALUE Extreme-CLI-Authorization Disabled 0 VALUE Extreme-CLI-Authorization Enabled 1 VALUE Extreme-Netlogin-Only Disabled 0 VALUE Extreme-Netlogin-Only Enabled 1 # End of Dictionary
The lines that begin with VALUE provide the integers that the RADIUS server sends to the switch when the corresponding text is configured in the RADIUS users file. For example, if the Extreme-CLI-Authorization attribute is set to Enabled for a particular user, the RADIUS server sends the value 1 to the switch (which reduces total bytes transferred). The ExtremeXOS software is designed to interpret the integer values as shown above, so be sure to use these values.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB