The following are sample policies that you can apply to restrict Telnet access.
In the following example named MyAccessProfile.pol, the switch permits connections from the subnet 10.203.133.0 /24 and denies connections from all other addresses:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB
MyAccessProfile.pol
entry AllowTheseSubnets {
if {
source-address 10.203.133.0 /24;
} then {
permit;
}
}
In the following example named MyAccessProfile.pol, the switch permits connections from the subnets 10.203.133.0 /24 or 10.203.135.0/24 and denies connections from all other addresses:
MyAccessProfile.pol
entry AllowTheseSubnets {
if match any {
source-address 10.203.133.0 /24;
source-address 10.203.135.0 /24;
} then {
permit;
}
}
In the following example named MyAccessProfile_2.pol, the switch does not permit connections from the subnet 10.203.133.0 /24 but accepts connections from all other addresses:
MyAccessProfile_2.pol
entry dontAllowTheseSubnets {
if {
source-address 10.203.133.0 /24;
} then {
deny;
}
}
entry AllowTheRest {
if {
; #none specified
} then {
permit;
}
}
In the following example named MyAccessProfile_2.pol, the switch does not permit connections from the subnets 10.203.133.0/24 or 10.203.135.0 /24 but accepts connections from all other addresses:
MyAccessProfile_2.pol
entry dontAllowTheseSubnets {
if match any {
source-address 10.203.133.0 /24;
source-address 10.203.135.0 /24;
} then {
deny;
}
}
entry AllowTheRest {
if {
; #none specified
} then {
permit;
}
}