The following tables, groups, and variables are supported in this MIB.
Table/Group | Supported Variables | Comments |
---|---|---|
ifMauTable | All objects | |
ifJackTable | All objects | |
ifMauAutoNegTable | All objects | Setting auto-negotiation through SNMP (Simple Network Management Protocol) is not supported. |
The following new Extreme proprietary MAU types have been added to the ifMauType textual convention:
extremeMauType1000BaseWDMHD OBJECT IDENTIFIER ::= { extremeMauType 7 } "Gigabit WDM, half duplex" extremeMauType1000BaseWDMFD OBJECT IDENTIFIER ::= { extremeMauType 8 } "Gigabit WDM, full duplex" extremeMauType1000BaseLX70HD OBJECT IDENTIFIER ::= { extremeMauType 9 } "Gigabit LX70, half duplex" extremeMauType1000BaseLX70FD OBJECT IDENTIFIER ::= { extremeMauType 10 } "Gigabit LX70, full duplex" extremeMauType1000BaseZXHD OBJECT IDENTIFIER ::= { extremeMauType 11 } "Gigabit ZX, half duplex" extremeMauType1000BaseZXFD OBJECT IDENTIFIER ::= { extremeMauType 12 } "Gigabit ZX, full duplex" extremeMauType1000BaseLX100HD OBJECT IDENTIFIER ::= { extremeMauType 13 } "Gigabit LX100, half duplex" extremeMauType1000BaseLX100FD OBJECT IDENTIFIER ::= { extremeMauType 14 } "Gigabit LX100, full duplex" extremeMauType10GBaseCX4 OBJECT IDENTIFIER ::= { extremeMauType 15 } "10 Gigabit CX4" extremeMauType10GBaseZR OBJECT IDENTIFIER ::= { extremeMauType 16 } "10 Gigabit ZR" extremeMauType10GBaseDWDM OBJECT IDENTIFIER ::= { extremeMauType 17 } "10 Gigabit DWDM" extremeMauType10GBaseCX OBJECT IDENTIFIER ::= { extremeMauType 18 } "10 Gigabit CX - SFP+ twin coax cable" extremeMauType10GBaseT OBJECT IDENTIFIER ::= { extremeMauType 19 } "10 Gigabit BaseT" extremeMauType40G OBJECT IDENTIFIER ::= { extremeMauType 20 } "40 Gigabit interface"
Corresponding MAU Type List Bits values have been added:
extreme_ifMauTypeListBits_b1000baseWDMHD -- 64 extreme_ifMauTypeListBits_b1000baseWDMFD -- 65 extreme_ifMauTypeListBits_b1000baseLX70HD -- 66 extreme_ifMauTypeListBits_b1000baseLX70FD -- 67 extreme_ifMauTypeListBits_b1000baseZXHD -- 68 extreme_ifMauTypeListBits_b1000baseZXFD -- 69
The following standards-based additions have been made as a 'Work in Progress', as per draft-ietf-hubmib-mau-mib-v3-02.txt:
A new enumeration 'fiberLC(14)' for the JackType textual convention.
New MAU types:
dot3MauType10GigBaseX OBJECT-IDENTITY STATUS current DESCRIPTION "X PCS/PMA (per 802.3 section 48), unknown PMD." ::= { dot3MauType 31 } dot3MauType10GigBaseLX4 OBJECT-IDENTITY STATUS current DESCRIPTION "X fiber over WWDM optics (per 802.3 section 53)" ::= { dot3MauType 32 } dot3MauType10GigBaseR OBJECT-IDENTITY STATUS current DESCRIPTION "R PCS/PMA (per 802.3 section 49), unknown PMD." ::= { dot3MauType 33 } dot3MauType10GigBaseER OBJECT-IDENTITY STATUS current DESCRIPTION "R fiber over 1550 nm optics (per 802.3 section 52)" ::= { dot3MauType 34 } dot3MauType10GigBaseLR OBJECT-IDENTITY STATUS current DESCRIPTION "R fiber over 1310 nm optics (per 802.3 section 52)" ::= { dot3MauType 35 } dot3MauType10GigBaseSR OBJECT-IDENTITY STATUS current DESCRIPTION "R fiber over 850 nm optics (per 802.3 section 52)" ::= { dot3MauType 36 } dot3MauType10GigBaseW OBJECT-IDENTITY STATUS current DESCRIPTION "W PCS/PMA (per 802.3 section 49 and 50), unknown PMD." ::= { dot3MauType 37 } dot3MauType10GigBaseEW OBJECT-IDENTITY STATUS current DESCRIPTION "W fiber over 1550 nm optics (per 802.3 section 52)" ::= { dot3MauType 38 } dot3MauType10GigBaseLW OBJECT-IDENTITY STATUS current DESCRIPTION "W fiber over 1310 nm optics (per 802.3 section 52)" ::= { dot3MauType 39 } dot3MauType10GigBaseSW OBJECT-IDENTITY STATUS current DESCRIPTION "W fiber over 850 nm optics (per 802.3 section 52)" ::= { dot3MauType 40 }
Corresponding new Mau Type List bit values:
b10GbaseX(31) — 10GBASE-X b10GbaseLX4(32) — 10GBASE-LX4 b10GbaseR(33) — 10GBASE-R b10GbaseER(34 — 10GBASE-ER b10GbaseLR(35) — 10GBASE-LR b10GbaseSR(36) — 10GBASE-SR b10GbaseW(37) — 10GBASE-W b10GbaseEW(38) — 10GBASE-EW b10GbaseLW(39) — 10GBASE-LW b10GbaseSW(40) — 10GBASE-SW