Client host stations need the IP address configuration to match their protected VLANs. The edge switches do not require IP addresses, but this could optionally be done for management or troubleshooting purposes.
The following example shows IP address configuration:
* AGG-SWITCH#1.1 # configure vlan green-1 ipaddress 172.16.1.1/24 * AGG-SWITCH#1.2 # configure vlan purple-1 ipaddress 172.16.2.1/24 * AGG-SWITCH#1.3 # configure vlan orange-1 ipaddress 172.16.3.1/24 * AGG-SWITCH#1.4 # configure vlan red-1 ipaddress 172.16.4.1/24 * AGG-SWITCH#2.1 # configure vlan green-1 ipaddress 172.16.1.2/24 * AGG-SWITCH#2.2 # configure vlan purple-1 ipaddress 172.16.2.2/24 * AGG-SWITCH#2.3 # configure vlan orange-1 ipaddress 172.16.3.2/24 * AGG-SWITCH#2.4 # configure vlan red-1 ipaddress 172.16.4.2/24
Print
this page
Email this topic
Feedback
View PDF
Download EPUB