Virtual Links

In the situation when a new area is introduced that does not have a direct physical attachment to the backbone, a virtual link is used.

A virtual link provides a logical path between the ABR of the disconnected area and the ABR of the normal area that connects to the backbone. A virtual link must be established between two ABRs that have a common area, with one ABR connected to the backbone. Virtual Link Using Area 1 as a Transit Area illustrates a virtual link.

Click to expand in new window
Virtual Link Using Area 1 as a Transit Area
GUID-99C08808-C6F8-4C63-8B63-9B20AEC3FE27-low.png
Note

Note

Virtual links cannot be configured through a stub or NSSA area.

Virtual links are also used to repair a discontiguous backbone area. For example, in Virtual Link Providing Redundancy, if the connection between ABR 1 and the backbone fails, the connection using ABR 2 provides redundancy so that the discontiguous area can continue to communicate with the backbone using the virtual link.

Click to expand in new window
Virtual Link Providing Redundancy
GUID-A0F107B4-5BAD-486A-A51D-598DA26BDE33-low.png