Configuring the Remote Collector Address

You can specify up to four remote collectors to send the sFlow data to. Typically, you would configure the IP address of each collector. You may also specify a UDP port number different from the default value of 6343, and/or a virtual router (VR) different from the default of VR-Mgmt. When you configure a collector, the system creates a database entry for that collector that remains until the collector is unconfigured. All the configured collectors are displayed in the command: show sflow {configuration}.

Configure the remote collector using the command:
configure sflow collector {ipaddress} ipaddress {port udp-port-number} {vr vr_name}
Unconfigure the remote collector and remove it from the database using the command:
unconfigure sflow collector {ipaddress} ipaddress {port udp-port-number} {vr vr_name}

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback