The following example shows the routes in the BGP (Border Gateway Protocol) routing table at Router A after completing the configuration described in the previous two sections:
* Switch.52 # show bgp route all Routes: Destination Peer Next-Hop LPref Weight MED AS-Path --------------------------------------------------------------------------------- *>i 172.16.1.0/24 10.10.10.2 10.10.10.2 100 1 0 64505 *>i 10.1.1.0/24 10.10.10.2 10.10.10.2 100 1 0 64505 64496 0 *>i 10.1.2.0/24 10.10.10.2 10.10.10.2 100 1 0 64505 64496 0 *>i 10.1.3.0/24 10.10.10.2 10.10.10.2 100 1 0 64505 64496 0 *>i 10.1.34.0/24 10.10.10.2 10.10.10.2 100 1 0 64505 64499 Flags: (*) Preferred BGP route, (>) Active, (d) Suppressed, (h) History (s) Stale, (m) Multipath, (u) Unfeasible Origin: (?) Incomplete, (e) EGP, (i) IGP BGP Route Statistics Total Rxed Routes : 5 Feasible Routes : 5 Active Routes : 5 Rejected Routes : 0 Unfeasible Routes : 0 Route Statistics on Session Type Routes from Int Peer: 0 Routes from Ext Peer: 5
Print
this page
Email this topic
Feedback
View PDF
Download EPUB