The switch collects and displays the following statistics:
Port—The designated port.
VLAN—The associated VLANs.
Rx Frames Count—The total number of frames successfully received by the port on the designated VLAN.
Rx Byte Count—The total number of bytes that were received by the port on the designated VLAN.
Tx Frame Count—The total number of frames that were transmitted by the port on the designated VLAN.
Tx Byte Count—The total number of bytes that were transmitted by the port on the designated VLAN.
Frame and byte counters are also displayed through SNMP (Simple Network Management Protocol).
The switch collects and displays the following statistics:
VLAN—The designated VLAN.
Rx Total Frames —The total number of frames successfully received by the port.
Rx Byte Count—The total number of bytes that were received by the port.
Tx Total Frames—The total number of frames that were transmitted by the port.
Tx Byte Count—The total number of bytes that were transmitted by the port.
Note
While using VLAN statistics, traffic also matching egress ACL (Access Control List) counters will cause the VLAN statistics Tx counter to not increment.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB