Managing Notification Tags

When you create a target address, either you associate a list of notification tags with the target or by default, the defaultNotify tag is associated with the target. When the system generates notifications, only those targets associated with tags currently in the standard MIB table, called snmpNotifyTable, are notified.

Note

This notification entry can be deleted via CLI and also via MIB. If this is deleted, then this can result in the traps not being sent for trap receivers which do not have the tag-list value mentioned explicitly.

To add an entry to the table, use the following command:
configure snmpv3 add notify [[hex hex_notify_name] | notify_name] tag [[hex hex_tag] | tag] {type [trap | inform]}{volatile}

Any targets associated with tags in the snmpNotifyTable are notified, based on the filter profile associated with the target.
To display the notifications that are set, use the following command:
show snmpv3 notify {[[hex hex_notify_name] | notify_name]}
To delete an entry from the snmpNotifyTable, use the following command:
configure snmpv3 delete notify [{[[hex hex_notify_name] | notify_name]} | all-non-defaults]

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback