The profile is configured as follows:
create upm profile macMove ;# editor enable cli scripting create access-list dacl1 "source-address 192.168.10.0/24 " "permit ;count dacl1" create access-list dacl2 "source-address 192.168.11.0/24 " "permit ;count dacl2" create access-list dacl3 "source-address 192.168.15.0/24 " "deny ;count dacl3" create access-list dacl4 "source-address 192.168.16.0/24 " "deny ;count dacl4" create access-list dacl5 "source-address 192.168.17.0/24 " "deny ;count dacl5" configure access-list add dacl1 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl2 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl3 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl4 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl5 first ports $(EVENT.LOG_PARAM_3) conf access-list ingress_limit vlan v1 conf access-list ingress_limit ports $(EVENT.LOG_PARAM_3) conf access-list egress_limit any ;# enter . for SAVE/EXIT log target configuration create log target upm "macMove" configure log target upm "macMove" filter "macMoveFilter" enable log target upm "macMove"