To display information about a network or subscriber VLAN (Virtual LAN), use the command:
show vlan {virtual-router vr-name}
The following flags provide PVLAN specific information:
| s flat | Identifies a network VLAN port that the system added to a subscriber VLAN. All subscriber VLANs contain network VLAN ports that are marked with the s flag. |
| L flag | Identifies a subscriber VLAN port that is configured as a loopback port. |
| t flag | Identifies a tagged network VLAN port on which tag translation is enabled. The t flag only appears in the show vlan display for network VLANs. |
| e flag | Identifies a network VLAN port that is configured as an endpoint. The e flag only appears in the show vlan display for network VLANs. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB