In the following IPv6 configuration example, EXOS-1 is the restarting BGP (Border Gateway Protocol) router, and EXOS-2 is the receiving BGP router.
To configure router EXOS-1, use the following commands:
create vlan bgp-restart configure vlan bgp-restart add port 2:2 configure vlan bgp-restart ipaddress 2001:db8:1::1/48 enable ipforwarding ipv6 configure bgp as-number 100 configure bgp routerid 10.0.0.1 configure bgp restart both conf bgp restart add address-family ipv6-unicast create bgp neighbor 2001:db8:1::2 remote-as 200 enable bgp neighbor all capability ipv6-unicast enable bgp neighbor all enable bgp
To configure router EXOS-2, use the following commands:
create vlan bgp-restart configure vlan bgp-restart add port 2:5 configure vlan bgp-restart ipaddress 2001:db8:1::2/48 enable ipforwarding ipv6 configure bgp as-number 200 configure bgp routerid 10.0.0.2 configure bgp restart aware-only create bgp neighbor 2001:db8:1::1 remote-as 100 enable bgp neighbor all capability ipv6-unicast enable bgp neighbor all enable bgp
Print
this page
Email this topic
Feedback
View PDF
Download EPUB