disable rip export

Description

Disables RIP (Routing Information Protocol) from redistributing routes from other routing protocols.

bgp	Specifies BGP (Border Gateway Protocol) routes.
direct	Specifies interface routes (only interfaces that have IP forwarding enabled are exported).
e-bgp	Specifies external BGP routes.
i-bgp	Specifies internal BGP routes.
ospf	Specifies all OSPF (Open Shortest Path First) routes.
ospf-extern1	Specifies OSPF external route type 1.
ospf-extern2	Specifies OSPF external route type 2.
ospf-inter	Specifies OSPF-inter area routes.
ospf-intra	Specifies OSPF-intra area routes.
static	Specifies static routes.
isis	Specifies IS-IS routes.
isis-level-1	Specifies ISIS Level 1 routes.
isis-level-1-external	Specifies ISIS Level 1 External routes.
isis-level-2	Specifies ISIS Level 2 routes.
isis-level-2-external	Specifies ISIS Level 2 External routes.

Disabled.

This command disables the exporting of BGP, static, direct, and OSPF-learned routes into the RIP domain.

The following command disables RIP from redistributing any routes learned from OSPF:

disable rip export ospf

This command was first available in ExtremeXOS 10.1.

This command is available on all platforms with an Edge, Advanced Edge, or Core license.