clear access-list meter

clear access-list meter {meter_name} [any | ports [all | port_list ] | vlan vlan_name]

Description

Clears the specified access list meters.

`meter_name`	Specifies the ACL (Access Control List) meter to clear.
any	Clear the meter applied to wildcard, including all VLANs and all ports.
ports	Clear the meter applied to a specific port list.
`port_list`	Specifies to clear the counters on these ports.
vlan	Clear the meter applied to a specific VLAN (Virtual LAN).
`vlan_name`	Specifies to clear the counters on the VLAN.

N/A.

Use this command to clear the out-of-profile counters associated with the meter configuration.

The following example clears all the out-of-profile counters for the meters of the ACL on port 2:1:

clear access-list meter port 2:1

The following example clears the out-of-profile counters for the meter meter2 of the ACL on port 2:1:

clear access-list meter meter2 port 2:1

This command was first available in ExtremeXOS 11.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next