configure mvrp vlan auto-creation

configure mvrp vlan auto-creation [on | off]

Description

Enables or disables the dynamic VLAN (Virtual LAN) creation feature of MVRP.

Syntax Description

mvrp Multiple VLAN Registration Protocol.
auto-creation When enabled, results in VLANs added dynamically on the switch through MVRP.
on Enable auto-creation.
off Disable auto-creation.

Default

Enabled.

Usage Guidelines

Use this command to enable or disable the dynamic VLAN creation of MVRP. By default, auto-creation is enabled. If disabled, the switch may participate in the MVRP protocol, and advertised static VLANs, but will not dynamically create VLANs.

Example

The following command enables MVRP VLAN auto creation:

configure mvrp vlan auto-creation on

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.