configure erps timer wait-to-restore

configure {erps} ring-name timer wait-to-restore [ default | milliseconds ]

Description

Configure a time interval to wait before restoring.

`ring-name`	Alphanumeric string that identifies the ERPS (Ethernet Ring Protection Switching) ring.
default	The default value, 300000 milliseconds.
`milliseconds`	The time interval to wait before restoring, with a range of 0 to 720000 milliseconds.

The default is 300000 milliseconds.

Use this command to configure a time interval to wait before restoring.

The following command sets the wait-to-restore timer to 3000 milliseconds for an ERPS ring named “ring1”:

configure erps ring1 timer wait-to-restore 3000

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published December 2017prev | next