enable netlogin authentication failure vlan ports

enable netlogin authentication failure vlan ports [ports | all]

Description

Enables the configured authentication failure VLAN (Virtual LAN) on the specified ports.

all	Specifies all ports included in the authentication failure VLAN.
`ports`	Specifies one or more ports or slots and ports on which the authentication failure VLAN is enabled.

All ports.

Use this command to enable the configured authentication failure VLAN on either the specified ports, or all ports.

This command was first available in ExtremeXOS 12.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next