Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear lacp counters

clear lacp counters

Description

Clears the counters associated with Link Aggregations Control Protocol (LACP).

Syntax Description

This command has no parameters or variables.

Default

N/A.

Usage Guidelines

This command clears the following counters for LACP; it sets these counters back to 0 for every LACP port on the device:

  • LACP PDUs dropped on non_LACP ports.

  • Stats:

    • Rx - Accepted.

    • Rx - Dropped due to error in verifying PDU.

    • Rx - Dropped due to LACP not being up on this port.

    • Rx - Dropped due to matching own MAC.

    • Tx - Sent Successfully.

    • Tx - Transmit error.

Example

The following command clears the LACP counters on all ports:

clear lacp counters

History

This command was first available in ExtremeXOS 11.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next

Email this topicEmail this topic

Print this pagePrint this page