Displays the contents of the IPv6 routing table for routes with the specified origin.
| direct | Specifies direct routes. |
| static | Specifies static routes. |
| blackhole | Specifies blackhole routes. |
| ripng | Specifies RIPng (Routing Information Protocol Next Generation) routes. |
| ospfv3 | Specifies OSPFv3 (Open Shortest Path First version 3) routes. |
| ospfv3-intra | Specifies OSPFv3 Intra routing. |
| ospfv3-inter | Specifies OSPFv3 Inter routing. |
| ospfv3-extern1 | Specifies OSPFv3 External 1 routing. |
| ospfv3-extern2 | Specifies OSPFv3 External 2 routing. |
| isis | Specifies IS-IS routes. |
| isis-level-1 | Specifies IS-IS Level 1 routing. |
| isis-level-2 | Specifies IS-IS Level 2 routing. |
| isis-level-1-external | Specifies IS-IS Level 1 External routing. |
| isis-level-2-external | Specifies IS-IS Level 2 External routing. |
| bgp | Specifies Border Gateway Protocol. |
| ibgp | Specifies Interior BGP (Border Gateway Protocol) route. |
| ebgp | Specifies Exterior BGP route. |
| bootp | Specifies BOOTP route. |
| vr_name | Specifies a VR or VRF. |
N/A.
None.
The following example displays the RIPng routes:
show iproute ipv6 origin ripng
This command was first available in ExtremeXOS 11.2.
The bootp attribute was added in 15.7.1
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.4 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB