configure snmpv3 delete community

configure snmpv3 delete community [all | {[[hex hex_community_index] | community_index} | {name [[hex hex_community_name] | community_name}]

Description

Deletes an SNMPv3 community entry.

all	Specifies that all community entries are to be removed.
`hex_community_index`	Specifies the row index in the snmpCommunityTable. The value is to be supplied as a colon separated string of hex octets.
`community_index`	Specifies the row index in the snmpCommunityTable in ASCII format.
`hex_community_name`	Specifies the community name. The value is to be supplied as a colon separated string of hex octets.
`community_name`	Specifies the community name in ASCII format.

The default entries are public and private.

Use this command to delete an SMMPv3 community in the community MIB.

The following command deletes an entry with the community index comm_index:

configure snmpv3 delete community comm_index

The following command creates an entry with the community name (hex) of EA:12:CD:CF:AB:11:3C:

configure snmpv3 delete community name hex EA:12:CD:CF:AB:11:3C

This command was first available in ExtremeXOS 10.1.

The hex_community_index and hex_community_name parameters were added in ExtremeXOS 11.0.

The all-non-defaults keyword was replaced with the all keyword in ExtremeXOS 22.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next