disable switch usb

Description

Disables use of the switch's USB port.

usb	Specifies USB port on switch.

Enabled by default.

This command requires a reboot to take effect.

Stack support is not available. You need to run this command individually on each node in a stack.

Running unconfigure switch all removes this USB setting and returns to the default of enabled.

The following example disables use of the USB port:

disable switch usb
This setting will take effect at the next system reboot.

This command was first available in ExtremeXOS 22.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next